Pantalla Tactil

How to build TouchKit USB kernel module
1. Please make sure some packages are installed before you want to build the
kernel module “tkusb.ko”, such as development library and kernel-source.
Note: The kernel-source version must be the same as your running kernel.
2. Rebuild the kernel module. It is needed for USB TocuhScreen controller.
Please follow steps below to build the kernel module “tkusb.ko”.
Note: This kernel module of ko format is used for kernel 2.6.x only.
2.1 ) Open a terminal window and locate the copied directory. Then, go to the
subdirectory “USBSrc”. Execute “make all”. Then, the kernel module will
be built in your working directory.
2.2 ) Copy the kernel module “tkusb.ko” to target directory.
For example, “/lib/modules”
2.3 ) Make device node for USB TouchScreen controller. For example,
mknod /dev/tkpanel0 c 180 180 ( for first USB TouchScreen controller )
mknod /dev/tkpanel1 c 180 181 ( for second USB TouchScreen controller )
2.4 ) Modify rc.local file to load kernel module automatically. ( It is renamed
“boot.local” under SuSE Linux series. ) This file can be found in “/etc/rc.d”.
Append the following description in this file.
## TouchKit kernel module section begin ##
rmmod touchkitusb
# This module may be renamed “usbtouchscreen”.
insmod /lib/modules/tkusb.ko
# for Kernel 2.6.x only.
## TouchKit kernel module section end ##
Note: The user can check which internal kernel module is loaded for USB
TouchScreen controller via below instruction in a terminal window.
cat /proc/bus/usb/devices
3. Restart your platform.